First Cobalt Begins Testing Material for Refinery Restart

November 8, 2018

TORONTO, ON — (November 7, 2018) – First Cobalt Corp. (TSX-V: FCC; ASX: FCC; OTCQX: FTSSF) (the “Company”) is pleased to announce that it has commenced testing cobalt hydroxide material as feedstock for the First Cobalt Refinery.


  • SGS Canada retained to test suitability of different cobalt feed material using the First Cobalt Refinery’s current flowsheet
  • Cobalt hydroxide material to be assessed as a source of feed for the refinery to produce cobalt sulphate or metallic cobalt products for sale into the North American market
  • Discussions are underway with cobalt miners and commodity traders to explore options for ethically sourced cobalt hydroxide
  • Cobalt Camp muckpile sampling and ore sorting programs indicate potential as incremental feed

Trent Mell, President & Chief Executive Officer, commented:

“Our objective is to enter into a long-term agreement for a reliable source of ethically-mined cobalt. The cash flow potential from restarting the refinery in as little as 18 months could allow us to fund a significant amount of work to advance our flagship Iron Creek Cobalt Project in Idaho, USA while also providing a much-needed North American source of cobalt. In parallel with these tests, management has commenced discussions with third party sources of capital that would minimize or eliminate any equity dilution associated with a restart of the First Cobalt Refinery.”

The First Cobalt Refinery is a hydrometallurgical cobalt refinery in the Canadian Cobalt Camp, approximately 500 kilometres from the US border. On October 10, the Company released the results of three independent studies undertaken to estimate capital requirements, operating costs, permit renewal timelines, potential feedstock options and offtake opportunities. At a 24 tonne per day feed rate and using the current flowsheet, the capital cost of the restart is estimated at US$25.7M (including a 30% contingency) and a permitting review concluded that a restart is possible within 18 months of selecting a feedstock.

The Company is exploring various sources of feed for the refinery, which could include cobalt concentrate from mining operations, cobalt hydroxide and recycled battery materials from North America. With some flowsheet modifications, the refinery could produce a cobalt sulphate for the lithium-ion battery market or cobalt metal for the North American aerospace industry or other industrial applications. Current market conditions indicate that pricing for cobalt sulphate is in line with cobalt metal. 

The Company has engaged SGS Canada, a leading firm in mineral processing, metallurgy and process design, to test cobalt hydroxide and other material using the existing flowsheet of the First Cobalt Refinery and make recommendations on changes to the flowsheet to accommodate refining of cobalt hydroxide feed. Test work includes processing cobalt hydroxide using the First Cobalt Refinery flowsheet to a finished cobalt sulphate product. The test work will also examine the steps necessary to produce cobalt metal that would be produced through electrowinning.   

The Company is also engaging in discussions with companies specializing in the marketing and sourcing of concentrates to secure sources of ethically produced cobalt as feedstock for the First Cobalt Refinery. 

The Refinery historically produced cobalt carbonate, nickel carbonate and silver precipitate which can be smelted to produce doré. In order to produce cobalt sulphate, the flowsheet would be modified to include a cobalt crystallization circuit.

A final decision on whether to put the Refinery back into production has not been made at this time and any decision is contingent on the outcome of the foregoing studies and discussions, as well as the sourcing of viable feedstock.

Muckpile Sampling and Ore Sorting Programs

First Cobalt has sampled a number of historic muckpiles in the Cobalt Camp to determine whether this material could be concentrated and used as incremental feedstock for the First Cobalt Refinery, depending on the flowsheet.

In late 2017 and the first half of 2018, over 400 samples were collected from a number of muckpiles on First Cobalt’s patented ground to study the potential for processing lower grade material from historic mining operations. Samples were collected using an excavator to create a cross section through each muckpile and taken at various depths from within. In tandem with the sampling program, three one-tonne samples were collected to test ore sorting technology with the intent of increasing the head grade of feed material.

Ore sorting techniques have been particularly effective in increasing head grade without a significant loss of payable minerals. Sampled muckpiles had an average grade ranging from 0.04% to 0.10% Co and from 10 grams per tonne (gpt) to 60 gpt Ag before ore sorting. After ore sorting, the average feed grade was increased from 0.081% Co and 46 gpt Ag to an average of 0.575% Co and 190 gpt Ag, representing a 7.1-times increase in cobalt grade and 4.1-times increase of silver grade. The ore sorting process provided an estimated 85% cobalt recovery and 58% silver recovery. Average results are based on five assayed ore sorting tests that were conducted in Austria during October 2018.

A total of 20 high priority muckpiles have been identified in Cobalt North, where total tonnage is estimated at 190,000 to 290,000 tonnes depending on thickness assumptions. These sampled muckpiles represent a portion of the muckpiles situated on First Cobalt’s properties and across the entire Cobalt Camp. Muckpiles in Cobalt Central and Cobalt South have yet to be surveyed to the same degree of confidence, however the majority of muckpiles are found in Cobalt North, where most of the historic mining occurred. Preliminary ore sorting tests indicate average weight recovery of sorted material to be approximately 14%.

While testing of historic muckpiles in the Cobalt Camp remains ongoing, and this historic material may in the future provide an incremental source of feedstock to the Refinery, further work is required and at this time the Company anticipates sourcing all feedstock from third-party sources.

Quality Assurance and Quality Control

First Cobalt has implemented a quality control program to comply with industry best practices for sampling, chain of custody and analyses. Muckpile samples were collected using an excavator to dig a cross section through each muckpile. Samples were collected in ten-litre pails and were taken at various depths from within the trench. Muckpiles for which safety reasons precluded use of this procedure were similarly sampled with a number of test pits. Blanks, duplicates and standards are inserted at the processing sites as part of the QA/QC program.

Muckpile samples were prepared at PolyMet Labs in Cobalt, Ontario and analyzed by Bureau Veritas in Vancouver, British Columbia. At PolyMet, samples were dried, weighed crushed to 85% passing -6 mesh, roll crushed to 85% passing -10 mesh, split 250 gram pulps, then pulverized in a closed bowl ring pulverizer to 95% passing -150 mesh. Prepared samples were shipped to Bureau Veritas where they were analyzed by a 4-acid digestion for ICP analysis.

Run-of-muckpile samples for ore sorting tests were prepared and analyzed by SGS Canada in Lakefield, Ontario. The samples were crushed using a jaw crusher to minus 2” (50 mm). The crushed material was then screened at ½” (12.7 mm). Each fraction was separately blended and approximately 10 kg split out for assaying. Samples for assaying were crushed to nominal 10 mesh and a subsample riffled and pulverized for assaying.

Ore sorting tests were conducted by REDWAVE ROX Mineral Sorting in Brodingberg, Austria. Sorted streams were riffle split by REDWAVE and sent to ALS – OMAC Laboratories Limited in Ireland where the samples were pulverized for assaying.

Qualified and Competent Person Statement

Peter Campbell, P.Eng., is the Qualified Person as defined by National Instrument 43-101 who has reviewed and approved the contents of this news release. Mr. Campbell is also a Competent Person (as defined in the JORC Code, 2012 edition) who is a practicing member of the Professional Engineers of Ontario (being a ‘Recognised Professional Organisation’ for the purposes of the ASX Listing Rules). Mr. Campbell is employed on a full-time basis as Vice President, Business Development for First Cobalt. He has sufficient experience that is relevant to the activity being undertaken to qualify as a Competent Person as defined in the JORC Code. The term “Competent Person” is not recognised by Canadian securities regulatory authorities, and the term is used by the Company with reference to the JORC Code, and to ensure compliance with the ASX Listing Rules and applicable reporting requirements in Australia.

About First Cobalt

First Cobalt a North American pure-play cobalt company whose flagship asset is the Iron Creek Cobalt Project in Idaho, USA, which has Inferred mineral resources of 26.9 million tonnes grading 0.11% cobalt equivalent. The Company’s other assets include 50 past-producing mines in the Canadian Cobalt Camp and the only permitted cobalt refinery in North America capable of producing battery materials.

On behalf of First Cobalt Corp.

Trent Mell
President & Chief Executive Officer

For more information visit or contact:

Heather Smiles
Investor Relations
[email protected]

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Cautionary Note Regarding Estimates of Resources

Readers are cautioned that mineral resources are not economic mineral reserves and that the economic viability of resources that are not mineral reserves has not been demonstrated. The estimate of mineral resources may be materially affected by geology, environmental, permitting, legal, title, socio-political, marketing or other relevant issues. The mineral resource estimate is classified in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum's "2014 CIM Definition Standards on Mineral Resources and Mineral Reserves" incorporated by reference into NI 43-101. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies or economic studies except for Preliminary Economic Assessment as defined under NI 43-101. Readers are cautioned not to assume that further work on the stated resources will lead to mineral reserves that can be mined economically. An Inferred Mineral Resource as defined by the CIM Standing Committee is "that part of a Mineral Resource for which quantity and grade or quality are estimated on the basis of limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological and grade or quality continuity. An Inferred Mineral Resource has a lower level of confidence than that applying to an Indicated Mineral Resource and must not be converted to a Mineral Reserve. It is reasonably expected that the majority of Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration."

Cautionary Note Regarding Forward-Looking Statements

This news release may contain forward-looking statements and forward-looking information (together, “forward-looking statements”) within the meaning of applicable securities laws and the United States Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical facts, are forward-looking statements. Generally, forward-looking statements can be identified by the use of terminology such as “plans”, “expects', “estimates”, “intends”, “anticipates”, “believes” or variations of such words, or statements that certain actions, events or results “may”, “could”, “would”, “might”, “occur” or “be achieved”. Forward-looking statements involve risks, uncertainties and other factors that could cause actual results, performance and opportunities to differ materially from those implied by such forward-looking statements. Factors that could cause actual results to differ materially from these forward-looking statements are set forth in the management discussion and analysis and other disclosures of risk factors for First Cobalt, filed on SEDAR at Although First Cobalt believes that the information and assumptions used in preparing the forward-looking statements are reasonable, undue reliance should not be placed on these statements, which only apply as of the date of this news release, and no assurance can be given that such events will occur in the disclosed times frames or at all. Except where required by applicable law, First Cobalt disclaims any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

Subscribe for News Updates